Skip to main content

Edwards Engineering £1 million grain processing plant

Published by , Editorial Assistant
Dry Bulk,


Edwards Engineering’s new £1 million grain drying and processing plant was built for a major grain process facility in Fife.

The project, delivered on time and on budget, saw Perth-based Edwards Engineering take on the challenge of designing, procuring and installing a fully bespoke unit, tailormade to suit the available space at the farm storage facility.

The 18 month project has resulted in a plant which dries and processes crops with significantly improved efficiency and to a higher specification.

Edwards worked with BDC Systems Ltd to design and install a SVEGMA continuous flow 50 tph grain dryer, Skandia conveyors and elevators, a JKF dust filtration system along with the grain pre-cleaner and cleaner from Cimbria.

Sandy Knight, Agricultural Manager, Edwards Engineering, said: “We worked closely with BDC Systems and Cimbria to develop the best possible design for the plant, providing the client with a, modern processing facility. Our client is now able to offer the highest quality of grain, whilst adhering to the most stringent health and safety standards.

“Our design for the plant allows our client to dry crops at a higher throughput, making the whole process quicker, while high tech controls enable one-person operation for the whole plant, saving manpower.

“As principal contractor, managing the process right through from design to installation, we were able to take a lot of the pressure off our clients. We managed multiple suppliers, negotiated with utility suppliers over electricity capacity upgrades and streamlined the design, procurement, installation, mechanical and engineering work, and after sales support, all under one roof. We also adapted our scope of work during the project to assist with the upgrade of the utilities.”

John Wilson, Scotland & North England Sales Manager, BDC Systems, said: “Working closely with Edwards Engineering was essential in bringing this project to fruition, especially where there were design revisions during the process.”

Read the article online at: https://www.drybulkmagazine.com/dry-bulk/28042020/edwards-engineering-1-million-grain-processing-plant/

You might also like

 
 

Embed article link: (copy the HTML code below):


 

This article has been tagged under the following:

Grain cargo news