Bedeschi to supply equipment to Eramet Comilog
Published by Jessica Casey,
Bedeschi is suppling a system to Neyrtec Mineral for the feeding, handling and stor-age of manganese for the new Moanda Manganese Mine in Eastern Gabon, with a final destination to Comilog (an Eramet subsidiary).
The delivery includes three truck’s receiving positions each equipped with an inclined apron feeder and an hopper with a volume of approximately 100 t each. The product arrives by truck CAT 777 and is directly unloaded into the hopper; special care has been taken in the design of the hopper which is equipped with the most vertical walls possible in order to avoid the creation of bridges during unloading operations.
The special shape of the apron feeder plates allows the application on the discharge head of a cleaning scraper as the one usually installed on rubber belt conveyors.
Each apron feeder has a centre-to-centre distance of 10 m and an apron width of 2.2 m.
It is also equipped with a scraper chain to keep the working area clean. Almost the 90% of manganese coming from the mine has a granular size less than 40 mm.
The three apron feeders supplied by Bedeschi can work simultaneously and each feeds a washing and screening line via rotary scrubbers. From the latter, the washed and screened manganese goes to piles which are formed by rotary/circular stackers. In particular, the following piles are made:
- A 0.1 mm pile with a volume of 9000 t of stored material.
- A 2.8 mm pile with a volume of 6700 t of stored material.
- A pile of >8 mm with a volume of 12 500 t of stored material.
In addition, a fourth pile is formed using a fixed belt for manganese with a size of 0.5 mm and a storage capacity of 4000 t.
Moreover, to the apron feeders, Bedeschi supplied all belt conveyors connecting the apron feeders to the scrubbers, from the washing and screening to the storage.
Once the installation and commissioning of the plant has been completed, COMILOG GABON will be one of the largest manganese producers in the world.
Read the article online at: https://www.drybulkmagazine.com/material-handling/23052022/bedeschi-to-supply-equipment-to-eramet-comilog/
You might also like
Seawing automated kite system to be installed on the CORONA CITRUS
Kawasaki Kisen Kaisha, Ltd. and Electric Power Development Co., Ltd. have decided to install the “Seawing,” an automated kite system using wind power, on CORONA CITRUS, an 88 000 DWT-type special coal carrier for J-POWER.