New self-unloading bulk carrier developed to overcome draught limited ports
Published by Harleigh Hobbs,
Editor
Dry Bulk,
National Ports in partnership with thyssenkrupp Industrial Solution have developed a self-unloading super shallow draft bulk carrier, the Transmax™, which is intended to revolutionise the transhipping operation in shallow water ports around the world.
The Transmax is a 190 000 DWT bulk carrier on 14 metre draft, the existing capacity on the same draft is 120 000 DWT). Each self-propelled Transmax will be designed to match the depths of water available at each port, for example, a 60 000 DWT Transmax can transit a port with water depths of only 6.5 metre.
The Transmax is equipped with innovative cargo handling systems designed and built by thyssenkrupp Industrial Solution, capable to self-unload its cargo into any size ocean going vessel at rates of up to 10 000 tph compares with prevailing technologies with a maximum unloading rate of 3000 – 5000 tph.
The Transmax can be loaded at existing berths using existing shiploaders or can be loaded directly from a shore conveyor avoiding the capital cost for a conventional marine berth and travelling shiploaders. This represents a substantial saving in CAPEX.
The Transmax is able to self-unload cargo from any size bulk carrier and is a solution for draft restricted ports worldwide.
Limited draft is a worldwide problem
- The vast majority of global export ports are geographically remote and not sufficiently dredged to handle modern bulk carriers.
- The majority of import ports suffer the same difficulty.
- Most ports have a draft of 14 metres or less, e.g Australia, India, Brazil, Africa and Middle Eastern countries.
- Dredging is very expensive and this cost increases exponentially when dredging hard materials, particularly in rock. Furthermore, environmental requirements/regulations are far reaching and challenging.
- Capesize bulk carriers require a draft of about 19 metres including clearance under the keel.
- Draft limitations constrain exports and imports.
Examples of countries with challenging export/import
Australia (Port Hedland)
The average vessel loading iron ore at Port Hedland is 180 000 DWT on 18.2 m draft. Port Hedland’s inner harbour and channel have a draft of 14.3 m at low tide. Laden cape size ships can only depart the inner harbour at high tide.
According to the Pilbara Ports Authority, the maximum throughput capacity of the port is 577 million tpy. This will be reached in approximately three years.
The Pilbara Port Authority does not have a solution on how to increase the port throughput at Port Hedland beyond 577 million tpa.
The self-propelled Transmax opens (24/7) the draft limited port of Port Hedland to far greater tonnages with no dredging, CAPEX, or change to materials handling process or equipment.
Brazil
The distance from Brazil to the markets of China, Japan, Korea, and other South East Asian countries, is about three times more than its Australian competitors. This represents a major additional shipping cost.
To mitigate the challenge of the extra distance in an effort to reduce the freight costs and allow Vale to compete with the Australian producers, Vale has built a fleet of very large bulk carriers (400 000 DWT Valemax).
Very few ports in China, Japan, Korea or other world countries can accommodate these 400 000 DWT vessels.
By positioning the self-propelled Transmax in deep water near the port of destination, Vale can deliver its bulk commodities with its Valemax ships directly to any port in the world.
The Transmax can self-unload the full cargo from the 400 000 DWT vessel and self-discharge it directly at the port of destination at the rate of up to 10 000 tph.
Chartering and cost-savings
- The Transmax can be chartered on a per tonne basis. The transhipment cost per tonne will be off-set by the following saving:
- For exporting ports such as Port Hedland, the ocean going vessel will no longer enter the inner harbour, therefore the port cost will be massively reduced.
- Export/imports can now be undertaken by larger ocean going bulk carriers, therefore the freight cost per tonne will be far less.
- In some cases because of tide restriction, the ocean going vessel currently depart the berth NOT fully loaded, by operating the Transmax, the dead freight cost is removed.
- Reduction of demurrage cost.
The effective net result is that the client will be able to increase the cargo throughput at almost zero cost.
Read the article online at: https://www.drybulkmagazine.com/material-handling/22112017/new-self-unloading-bulk-carrier-developed-to-overcome-draught-limited-ports/
You might also like
Port of Ghent boosts bulk handling with a Generation 6 Konecranes Gottwald Mobile Harbour Crane
Euroports Group is set to strengthen its bulk handling capacity at North Sea Port (Ghent) with the addition of a state-of-the-art Generation 6 Konecranes Gottwald ESP.7B Mobile Harbor Crane.