Skip to main content

Samson to provide two material feeders for Spanish biomass power plant

Published by , Editor
Dry Bulk,

A new biomass power plant to be built for ENCE Energía & Celulosa in Huelva (Spain) by Spanish general contractor, SENER, will have two Samson® material feeders, which have been ordered from AUMUND Fördertechnik GmbH.

Samson to provide two material feeders for Spanish biomass power plant

The new power plant will use many different alternative fuels. The decision by SENER/ENCE in favour of the Samson machines was just as much a rejection of the originally planned deep pit solution. The two Samson feeders will receive the various biomass materials, which can be delivered by several trucks at the same time, and convey them into the power plant, which is designed to produce 40 MW using 100% biomass.

Compared to the originally planned deep pit solution, the Samson machines demonstrate significant advantages on a number of levels. They are simply positioned at ground level and can receive bulk materials directly from dump trucks or sliding tippers. They convey moist, sticky bulk materials without bridging. Significantly less dust is produced due to extraction of material rather than reception of falling material from heights, and last but not least, robustness and reliability make the Samson material feeder a durable allrounder.

A particularly striking advantage compared to the deep pit solution for the biomass power plant in Huelva is the significantly smaller enclosure that is required, and consequently the much smaller volume of dust to be suppressed. Had the deep pit solution gone ahead, more extensive building modifications with higher investment costs would have been required. The capital investment which had been set aside for civil works is no longer required. All in all, the effectiveness of a Samson material feeder in environmental protection speaks for itself.

Read the article online at:

You might also like


Embed article link: (copy the HTML code below):


This article has been tagged under the following:

Minor bulks news