Skip to main content

Liebherr heavy lift crane installation near to completion:

Published by , Editorial Assistant
Dry Bulk,

Liebherr’s maritime manufacturing plant in Rostock has achieved the next milestone in its outstanding heavy lift project. Using the new Liebherr portal crane at the port of Rostock, the TCC 78000, the company’s experts and DEME have installed one of the most distinctive parts of the Heavy Lift Crane 295000: the 145 m long boom.

The next milestone for the largest crane ever built by Liebherr has been ful-filled. The 145 m long boom was connected successfully to the cranes slewing unit. “This is the first time Liebherr has manufactured and installed a crane of this size. We expected a lot of exciting challenges, which our specialists were eager to solve”, said Leopold Berthold, Managing Director of Liebherr Rostock.

“The challenging installation processes went smooth due to the remarkable job done by the involved employees.” All major crane elements have been installed on the Orion, the next generation offshore installation vessel which will operate the HLC in the future. The Orion, owned by the Belgian DEME Group, has dual-fuel engines and can be driven by conventional fuel or LNG. With the HLC on board as well as a maximised deck space, the vessel offers a unique combination of lifting functionality and loading capacity.

One of the key success factors for the different installation lifts was the new TCC 78000, the Liebherr portal crane at the quayside. The landmark of the Liebherr Rostock plant, visible from afar, was significantly involved in every instal-lation step: lifting the lower and upper part of the slewing unit, the A-Frame and finally, the boom.

“The boom was the last large construction element of the HLC that had to be lifted on the Orion”, added Robert Pitschmann, Sales Project Manager of the HLC 295000. “There are still a few steps to finalise the construction of the crane. We are looking forward to see the HLC in action during its first operation at Moray East Windpark.”

Heavy lift cranes with large functional range

With a maximum lifting capacity of 5000 t at an outreach of 35 m and a maxi-mum lifting height in excess of 175 m above the deck of the Orion, the HLC 295000 accesses new markets for Liebherr-MCCtec Rostock GmbH. The HLC and the ex-pansion of the heavy-duty crane program is anchored in the Liebherr strategy not least because of the energy revolution. Offshore wind turbines

become larger and are being built more and more to guarantee sustainable energy provision for current and future generations. To construct these large wind turbines, the unique lifting height of the HLC with up to 175 m is very important.

In addition, there is the trend of decommissioning the offshore oil and gas in-stallations, where large and heavy parts are being dismantled – another task that the HLC products of Liebherr can easily manage due to their lifting capacity of 5000 t.

“The decisive factor is the variety of operations that the HLC can cover in com-bination with its large functional range. Liebherr heavy lift cranes can be used for different lifting situations all around the world”, summarised Berthold.

Read the article online at:

You might also like


Embed article link: (copy the HTML code below):


This article has been tagged under the following:

Dry bulk shiploading news