Proactive measures needed to improve hull performance

Owners seeking to lower fuel costs and comply with pending regulations on emissions and invasive species often look to equipment manufacturers to meet their needs. From new efficient engine designs to alternative fuels, scrubbers to ballast water treatments systems, owners face some expensive decisions. But with more vessels now equipped with onboard sensors and standardised tools to measure speed loss due to hull fouling, owners and fleet managers now have access to reliable data measuring the impact of hull and propeller performance over time.

10 year statistics: the link between hull performance and vessel efficiency is much stronger than previously thought

According to Jotun Marine Analyst Manager Manolis Levantis, Jotun Marine has collected data on hull performance from different types of vessels on different trades for more than decade. “Jotun’s Hull Performance Solutions requires participating vessels to install sensors to enable performance monitoring based on standardised principles (ISO 19030) for the measurement of changes in hull and propeller performance,” he explained.

Levantis said that hull and propeller performance have a much larger impact on vessel efficiency than previously thought. “We estimate that the average yearly speed loss for all vessel types and trades, regardless of what anti-fouling is used, is about 6%,” he said. “For a typical bulk carrier, compensating for this speed loss would require an increase of power of up to 18%, resulting in higher fuel costs and greenhouse gas (GHG) emissions.”

Levantis is careful to note that Jotun’s data is taken from owners and fleet managers who are committed to improving hull performance. “When you consider that low freight rates over the past five years have discouraged many owners from investing in premium anti-foulings or sensor technologies, the market speed loss average may exceed 6%.”

Case study: fuel savings of US$1.5 million

While Jotun does not usually share customer data, the company worked in cooperation with Gearbulk in 2016 to measure hull performance. GearBulk, which operates the world’s largest fleet of open hatch gantry and semi-open jib craned vessels, shared historical performance data from the cargo ship Penguin Arrow dating from January 2000, allowing for a full comparative analysis.

After installing sensors and applying Jotun’s premium anti-fouling, the company was able to monitor speed loss over a 60 month period. The results indicated a speed loss of just 0.5%, resulting in an estimated fuel savings of US$1.5 million and a corresponding reduction of CO2 emissions of 12 055 t.

“Our data conclusively proves the link between hull performance and fuel efficiency,” said Levantis. “And with the IMO’s pledged to reduce the total annual GHG emissions by at least 50% by 2050 compared to 2008, we believe hull performance will play a greater role in helping owners and fleet managers comply with pending regulations.”

The cost of fouling: significant CO₂ emissions and claims related to charter party agreements

According to the Clean Shipping Coalition, the only international environmental organisation that focuses exclusively on shipping issues, poor hull and propeller performance accounts for around 10% of the world fleet’s energy consumption, translating to about US$30 billion in additional fuel costs for the world fleet, every year. Burning this fuel adds 0.3% to shipping’s total greenhouse gas output, which, according to the IMO, is about 2.2% of the world’s total – about the same output as Germany.

Failure to prioritise hull performance not only result in additional fuel costs, but also may expose owners to claims related to charter party agreements or additional costs for periodic underwater hull cleanings. At the same time, port authorities in Australia, New Zealand, California and the EU have become increasingly sensitive to biofouling risk, placing new requirements on owners.

Next generation hull maintenance: shipping seeks a more proactive approach

While new anti-fouling technologies have drastically reduced speed loss between drydockings and more ports are offering advanced ROV hull cleaning services, pending regulations on emissions and invasive species will require a more proactive approach to hull maintenance. Increasingly, owners are seeking solutions to manage hull performance more effectively between dry dockings, when fouling occurs. After all, removing slime before marine organisms can attach to the hull would not only improve vessel efficiency and lower GHG emissions, but also help control the spread of invasive species.

Read the article online at: https://www.drybulkmagazine.com/dry-bulk/18022020/proactive-measures-needed-to-improve-hull-performance/