Flexco launches new version of PTEZ belt trainer

Designed with Flexco “pivot and tilt” technology, the new PTEZ HD belt trainer can be used in any application that requires tracking to prevent damage to the belt or conveyor structure, including single-direction and reversing belts.

The pivot and tilt feature on both PTEZ models ensures that the belt stays away from the structure and the material stays on the belt without the use of sensor or edge rollers. The tapered ends on the roller drive the pivot and tilt mechanism, allowing the two forces to quickly move the belt back to centre.

“The demand for a trainer that could handle wider belts and tougher environments led us to develop the PTEZ HD Belt Trainer,” said Kevin Fales, Product Manager for Flexco. “It still features the unique pivot and tilt technology of the PTEZ, but is made for a more rugged environment.”

The PTEZ HD belt trainer can be used on vulcanized or mechanically fastened belts on almost any heavy-duty application up to 2400 PIW maximum tension, including wet and dry conditions, belts with edge damage or wear, and belts that are mistracking to one or both sides.

The belt trainer comes in belt widths of 42 in. to 84 in. (1050 mm to 2100 mm), and can be mounted as a standard “pull-up” mounting by swapping it out with an existing return idler, or it can be mounted on the clean side of the belt, which uses the material-free bottom cover as the contact area for the belt trainer. The simple, adjustable mounting brackets ensure quick and accurate installation with either method.

The PTEZ HD belt trainer also features a polyurethane roller cover, which ensures lasting performance in even the toughest conditions. Flexco’s proprietary urethane is proven to last as much as 3 – 4 times longer than rubber, while still providing the grip needed to efficiently drive the pivot and tilt mechanism.

Read the article online at: https://www.drybulkmagazine.com/product-news/10012018/flexco-launches-new-version-of-ptez-belt-trainer/