SAMSON Materials Handling Ltd has received an order from TradeMark East Africa for four Eco Hoppers with ATEX to be employed at the Port of Mombasa in Kenya. The engineering design follows successful collaboration of the AUMUND Group of companies, including SAMSON Materials Handling Ltd, Ely/UK and SCHADE Lagertechnik GmbH.
The Eco Hoppers will be used for the import of clinker, coal and gypsum. Management of air quality and fugitive dust is very important as operation will be in a dusty atmosphere with high levels of humidity and temperatures ranging from 22 – 40°C. A variety of dust suppression measures will be employed both at the intake area of the Eco Hopper itself as well as on a dusting system situated between the hopper and truck. The dust reduction measures include an automatic reverse-jet cleaning system, air compressors, inlet grill with suction capacity, a flex-flap creating a pressure differential and a dust filter unit on three sides of the hopper.
The Eco Hopper inlet grill measures 6 m x 6 m and is topped by a 2 m high shroud which creates an aperture of 8.2 x 8.2 m for grab discharge thus mitigating the effects of high winds. The Eco Hopper is mounted on a chassis, which brings the total height of the configuration to 15.7 m allowing a truck clearance height of over 4m. The 4 Eco Hoppers for the Port of Mombasa are mobile powered travel with crabbing functionality to enable specific positioning of the hoppers alongside the vessel. The throughput of each Eco Hopper is designed to operate at a peak rate of 700 tph. The Eco Hoppers also include ATEX for dust filtration.
Read the article online at: https://www.drybulkmagazine.com/ports-terminals/24072017/port-of-mombasa-to-receive-four-eco-hoppers/